Martian Pyramid
thingiverse | Free
This thing is my entry for the Mars Base challenge. The pyramid is one of the most ...
Browse 56 Calibration Pyramid 3d Models in Printable Stl files format and related assets
thingiverse | Free
This thing is my entry for the Mars Base challenge. The pyramid is one of the most ...
thingiverse | Free
To get dimensionally accurate printouts the printer has to be calibrated appropriately. ...
thingiverse | Free
This is a simple model to test your bed level and adhesion. It’s roughly 200×200 ...
thingiverse | Free
Projectvideo:https://youtu.be/IWbeTUQQgZ4Hinged Calibration Cube:https://www.thingiverse.com/thing:4943713Accessories ...
thingiverse | Free
This is the 3D-Model notebookcheck uses to test and review FDM(FFF) 3D Printers. ...
thingiverse | Free
This object is designed to help you check that you are correctly leveling you printer ...
thingiverse | Free
If you print this test, please comment below with what material and gcode you used ...
thingiverse | Free
Hi everyone!Calibration cubes are great to test out printing tolerances and surface ...
thingiverse | Free
Parametric design (OpenSCAD, so usable through the Customizer) added!This calibration ...
thingiverse | Free
Ricktu has got a great idea to design a single line with contiuous cross section ...
thingiverse | Free
...
thingiverse | Free
See if the circle on the bridge comes out ok!Struts are hollow to speed printing.My ...
thingiverse | Free
Customizer for testing print overhang quality. Based on the same concept and design ...
thingiverse | Free
You can use these squares to easily level your bed. Print them out and then adjust ...
thingiverse | Free
I designed this Lithophane Calibration test for a standard sized nozzle 0.4mm.All ...
thingiverse | Free
Ever wonder how accurate or how well calibrated your 3D printer is?Well now you can ...
thingiverse | Free
Needed something simple for initial XYZ calibration, so I made this cube. ...
thingiverse | Free
HOW TO USE A TEMP TOWER: Run this G-code (or code the STL yourself) and see which ...
thingiverse | Free
This is an object in 4 versions to test the maximal possible overhang angle which ...
thingiverse | Free
This is a hollow 20mm cube for calibrating your 3D printer! Cubes are hugely popular ...
thingiverse | Free
Customizable design for testing bridging. You can use one of the pre rendered parts ...
thingiverse | Free
Here is a test print for calibrating your hot-end temperature.This is to see how ...
thingiverse | Free
This is Ducksie. When standing, he is a very confident little guy. Come close, and ...
thingiverse | Free
This is a set of 17 rings from size 0 to 16. Each has the size of the ring inscribed ...
thingiverse | Free
10/09/2020Added file “Bed Leveling Tool export objects v1.step with all objects.07/09/2020Added ...
thingiverse | Free
Millennium Puzzle from the Yugioh series, scaled to actual size.I have edited the ...
thingiverse | Free
Print Inspect for ghosting of the sharp edges (letters, dimples, corners) Proof ...
thingiverse | Free
NOTE TO SIMPLIFY 3D USERS: several users reported that S3D doesn’t slice this ...
thingiverse | Free
Flow rate and feed rate are no longer difficult to calibrate, thanks to stepper extruders. ...
thingiverse | Free
Test cube for new filaments.It’s designed to print fast, use only a small amount ...