Camera Screws Nuts Library
thingiverse | Free
Update 2021/05/20– Add the 7mm length screws.Camera screw 1/4-20 UNC– ...
Browse 94 Camera Screws 3d Models in Printable Stl files format
thingiverse | Free
Update 2021/05/20– Add the 7mm length screws.Camera screw 1/4-20 UNC– ...
thingiverse | Free
UPDATE 11/4/2022Per makers feedback, I have increased the tolerance by 0.15mm around ...
thingiverse | Free
Raspberry Pi Camera v2 case with a mounting arm for an Ender 3 V2 (also probably ...
thingiverse | Free
Swivel Trays provide a smart, compact and expandable storage solution for small things. ...
thingiverse | Free
This is a small, easy to use mount for the Raspberry Pi Camera module on 2020 extrusions.The ...
thingiverse | Free
Monster Mouth Headophone Holder 2020 edition.New version that incorporates feedback ...
thingiverse | Free
I wanted to create a nice grip for my spinner, and I also wanted it to be removable, ...
thingiverse | Free
A simple wrench I slapped together to loosen the screw lens(allowing to change focus ...
thingiverse | Free
http://www.youtube.com/watch?v=sbKjKKVewDU Tutorial:http://learn.adafruit.com/3d-printed-camera-led-ring ...
thingiverse | Free
The new [Gulfcoast Robotics] Creality Ender-3 Modular Y Carriage Plate features additional ...
thingiverse | Free
This is my 3-axis, motion control, camera slider I designed for my DSLR Canon EOS ...
thingiverse | Free
It’s finally here. Version 2.0 of the FPV-Rover.This is the second version ...
thingiverse | Free
Wanted to experiment with gimbals and camera stabilizers. Design wise I went a different ...
thingiverse | Free
So I made a zip tie mount here http://www.thingiverse.com/thing:83689 And I decided ...
thingiverse | Free
Inspired by the camera mount designed by Modmike (https://www.thingiverse.com/thing:2886101) ...
thingiverse | Free
NOTE: Currently being revised. Check back soon for update :)Bike frame mount for ...
thingiverse | Free
These boxes measure about 100mm (L) x 60mm (W) x 35mm (H). The lid has a bump that ...
thingiverse | Free
The Open Reflex, a research about desktop 3D printing, open design and hacking.100% ...
thingiverse | Free
I have been asked many times to release this so I finally decided to. It’s ...
thingiverse | Free
Glue is also optional, but your milage may vary with the tolerances of your printer. ...
thingiverse | Free
I setup a Raspberry Pi 3 to experiment with ROS, OpenCV, and whatever else I felt ...
thingiverse | Free
07/11/2013A new fixation arm for the Eflite 350 QX quadricopter21/07/2013:-Update ...
thingiverse | Free
Raspberry Pi Zero and Pi Zero 2 CaseCompatible with old & newer Pi Zero, Pi ...
thingiverse | Free
Hi all, I purchased an Raspberry 3.5″ Touchscreen. I couldn’t find a ...
thingiverse | Free
Raspberry Pi case with Pi camera for mounting on CR-10This is a combination of several ...
thingiverse | Free
Im not the greatest at writing up howto’s! So please be patient with me! I ...
thingiverse | Free
2019-12-10 There is a raspberry pi version available, which simplifies taking photos ...
thingiverse | Free
Testvideo: http://youtube.com/watch?v=DkFjwnt9Pi8I wanted to have a glidecam, but ...
thingiverse | Free
Want to support my work and even sell 3D prints of some of my designs? Check the ...
thingiverse | Free
After trying different ways to mount my Logitech c920 onto my Ender 3, I decided ...