Flareon Pokemon Low Poly Fan Art
thingiverse | Free
High Poly Version – https://social.thangs.com/m/217400 ...
Sealant Cartridge Nozzle Set.
thingiverse | Free
I designed some nozzles, one with a 45o angel and so it is great to use in bathrooms ...
Hero Me Remix 2 With Robust Assembly Extended Wire Management
thingiverse | Free
Jan 2020: It may be worth checking out my latest design – Hydra Fan Duct & ...
Wanhao I3 Fan Duct
thingiverse | Free
I found the original fan insufficient and it blocked the view of the hotend.This ...
Tmnt Bust Fan Art
thingiverse | Free
? For more sculpts like this, and if you are able to support my artwork, take a look ...
Raspberry Pi B Case With Fan
thingiverse | Free
This case is designed for a Raspberry Pi B+ controller board. Thereare holes in the ...
Satsana 5015 Fan Duct For Ender 3 Ender 5 Cr10
thingiverse | Free
This is an updated version of my popular fan duct for the stock Ender 3 that’s ...
E3D V5 V6 Single Dual Fan Duct Holder Prusa I3 Ver 2.0
thingiverse | Free
Design based here :http://www.thingiverse.com/thing:533029(for E3D_v5_v6_40mm_Duct.stl ...
Hepa Active Carbon Filter For 3D Printer Housing
thingiverse | Free
Hello!If you don’t have enclosure yet and want a really good looking and rigid ...
Cr10 Ender Hotend Cover For Stock Fans
thingiverse | Free
PLEASE READ! This is a WORK IN PROGRESS! PRINT AT YOUR OWN RISK!For 5015 version ...
Ender 3 Ender 3 Pro Fang For 40X40X20Mm Fan Cooler
thingiverse | Free
Fang for Creality Ender 3 and Ender 3 Pro.Remixed from SanderPuh’s CR-10 Fang ...
Nozzle Box
thingiverse | Free
Hardened nozzlesTitanium nozzlesBrass nozzlesLinks to used tools:6PCS M3-M10 Screw ...
Centrifugal Impeller Turbine Compressor
thingiverse | Free
A centrifugal impeller/turbine/compressor. Comes with a complete housing. Housing ...
Creality Ender 3 Part Cooling Fan Duct
thingiverse | Free
This is a part cooling fan duct for better air stream on the Creality Ender 3. I ...
Craftrums Direct Drive With Bmg Extruder And E3Dv6
thingiverse | Free
UPDATE 9.6.2022I’ve fixed some tolerances of the duct so it fits easier into ...
E3Dv6 Fan Duct
thingiverse | Free
This is the new fan duct designed for the E3D-v6 AllMetal HotEnd. It is designed ...
Shorter Hesine M505 Anet A8 Center Nozzle Fan
thingiverse | Free
I remixed this because using Don1337’s carriage http://www.thingiverse.com/thing:2193695 ...
Parametrizable Any Size To Any Size Fan Adapter With Manifold Tube Angle
thingiverse | Free
Full source at https://github.com/sherifeid/3dobjects.gitPLEASE READ THE INSTRUCTIONS ...
304060Mm Fan Silencer Lp
thingiverse | Free
** ATTENTION NOT TESTED ** * consider it a fan protector 30-40-60MM FAN SILENCER** ...
Ender 3 Fan Mod Airflow Optimization
thingiverse | Free
This is modified version of fan duct mod from https://www.thingiverse.com/thing:2814127Original ...
Ciiicooler For Wanhao Duplicator I3 Maker Select
thingiverse | Free
The DiiiCooler is a better cooler, but the CiiiCooler is a good alternative.[RECOMMENDED ...
7 Cylinder Radial Engine Model
thingiverse | Free
Note: This model is a correction to the original 8 cylinder radial engine model I ...
Nozzle Wrench Hex Bit Holder
thingiverse | Free
Made as a tool for nozzle change it can hold any standard hex bits so it can be used ...
High Bypass Jet Engine Fan
thingiverse | Free
A high bypass fan inspired by Rolls-Royce’s Trent series turbofans. Designed ...
Mini Bladeless Fan
thingiverse | Free
After looking at the fan designs from Helix3D, I wanted to try one but saw some issues ...
Cool Squeeze Grip Fan
thingiverse | Free
Final: https://youtu.be/kWvck_Mz_q8Gear demo: https://youtu.be/WQ8Kq8Ge7BEPrototype: ...
Red Squirrel Compact Fan Housing Ender 3 Pro Cr10 5015 Rev1
thingiverse | Free
This is a new design! If you make one please post a make and provide feedback!Based ...
Lithophane Calibration Test 0.4 Nozzle
thingiverse | Free
I designed this Lithophane Calibration test for a standard sized nozzle 0.4mm.All ...
Fan For Soldering From Old 2.5Inch Harddisk
thingiverse | Free
...
Satsana Remix For Ender 3V2 And Ender 3 With Bltouch 4010 And 5015 Fan Versions
thingiverse | Free
I’ve moved my designs over to prusaprinters since I am unhappy with the current ...